Homelite 16inch HT Coarse Stripe (XL-100 series,SEZ) bar stencil set
Many of the old saw manufacturers provided bars with their name and/or artwork. These bars really made the whole saw/bar package look great. Problem was, after several days of cutting, the artwork on the bars typically wore off. Now you can recreate that look of a complete saw/bar package with bar stencils! Just clean your bar, apply the stencils, spray a light coat or two of paint, remove the stencils and you have the artwork back! You receive stencils for both sides of your bar with transfer tape already applied to your stencils.
You receive stencils for both sides of your bar with transfer tape already applied to your stencils. Firmly press transfer tape onto stencil and peel off at a sharp angle to make sure that complete stencil is removed from backing paper and is on the transfer tape. Apply to a clean bar. Press firmly and remove transfer tape. Paint bar. Remove and discard stencil. Let first side of bar dry before applying stencil to other side of bar.
These stencils are made for a 16" bar that was typical on the XL-100 series, 150 and Super EZ saws.
Bar not included.
This product is produced by Sugar Creek Supply and is manufactured once your order is received. That insures you are getting the freshest product possible and that they haven’t been sitting on a shelf for years. Processing time can vary taking up to 10 – 12 days to ship depending on availability of materials.